My wireless connection says validating identity
The "Authentication Method", "Authentication Protocol" or "Inner Authentication Protocol" is MS-CHAPv2. The certificate should one called Quo Vadis Root CA 2.Although you may be able to connect to the eduroam wireless network without validating the server certificate, your connection will not be secure.Hi all, I just signed up (for my elderly mom) with Comcast for their hi-speed Internet service (performance level).Self-install kit included the ARRIS model TG 862G/CT Wi-Fi tower modem.The network name for the secure wireless network is eduroam. The wireless Network Authentication type is WPA2 Enterprise. If your wireless device does not support WPA2/AES, select WPA authentication and TKIP encryption.The "EAP Authentication Type" or "Outer Authentication Protocol" is PEAP or PEAPv0. Your password should be the password you use to access Office 365. If asked for an "Outer Identity", "Anonymous Identity" or "Roaming Identity", leave it blank. You should choose to Validate the Server Certificate.I added the AP as a client with and have tried using both RADIUS Standard and Cisco as the RADIUS type.I configured the IAS policy to grant access to Domain Computers, Authentication is set to PEAP and uses a private cert issued by our CA, the other profile settings are all default.
I'd start by reviewing the event logs on your IAS server for reasoning as to why it's not authenticating your client.
The client settings on the laptop match the IAS settings and the certificate is definately installed.
WPA2 is supported as i can connect to WPA2 personal APs. During the connection it flashes that it "connected" for a second then goes to "Validating Identity" which it eventually timesout on.
If you see a message about Validating Identity upon connecting to the Cradlepoint router, it means WEP security mode is enabled.
To resolve this issue, disable 802.1X feature on your Windows computer.